Sheeva stopped booting

[DougS]

My plugpbx has been running fine for about a year.

Recently had to reconfigure my home network, and decided to assign a fixed IP address to the Sheeva. So, using Webmin, I assigned a fixed IP, and rebooted the Sheeva for the first time in 6 months or so.

Now it appears unresponsive. I've tried connecting by IP and serial...no response. Tried with the SD Card inserted or removed. With the serial cable plugged in, nothing appears in /dev. I re-installed the serial-usb drivers, and no change.

Any ideas? There is one green light lit up, the other led is dark. There is no blinking pattern when I plug it in, just solid green.

[PlugPBX Admin]

Green LED is the power supply.

Blue LED is the bootroom / boot loader / logic board health indicator?

If you don't see the uboot boot loader over the USB serial connection, then it sounds like the logic board is dead. You are first person to report a dead logic board on these forums anyways.

Units are running around $80 now, I have several in my household for such reasons above, but never had issues myself. *shrug*

[mattmc97]

Where are you finding them for $80?

http://www.globalscaletechnologies.com/p-22-sheevaplug-dev-kit-us.aspx

still shows them @ $99

mattmc

[PlugPBX Admin]

Someone had told me a few weeks back the price dropped to 80 or so  bucks. Perhaps they were wrong, or im going senile?

[mattmc97]

I wish. I need to order a backup. I was hoping you were right.

Post a link if you find one for $80

thanks.